Sign Making Supplies

Hotsale 48 1200mm Acrylic Plastic PVC Channel Bending Machine, 1-6mm Thickness

Hotsale 48 1200mm Acrylic Plastic PVC Channel Bending Machine, 1-6mm Thickness
Hotsale 48 1200mm Acrylic Plastic PVC Channel Bending Machine, 1-6mm Thickness
Hotsale 48 1200mm Acrylic Plastic PVC Channel Bending Machine, 1-6mm Thickness
Hotsale 48 1200mm Acrylic Plastic PVC Channel Bending Machine, 1-6mm Thickness
Hotsale 48 1200mm Acrylic Plastic PVC Channel Bending Machine, 1-6mm Thickness
Hotsale 48 1200mm Acrylic Plastic PVC Channel Bending Machine, 1-6mm Thickness
Hotsale 48 1200mm Acrylic Plastic PVC Channel Bending Machine, 1-6mm Thickness
Hotsale 48 1200mm Acrylic Plastic PVC Channel Bending Machine, 1-6mm Thickness
Hotsale 48 1200mm Acrylic Plastic PVC Channel Bending Machine, 1-6mm Thickness

Hotsale 48 1200mm Acrylic Plastic PVC Channel Bending Machine, 1-6mm Thickness
Manual Acrylic Light Box Plastic PVC Bending Machine Heater. 1-6mm Thickness 2 packages in total. Description: The acrylic bending machine heater is the core part of bending machine. You can assemble various kinds of ideal practical acrylic bender with this heater.

Processing Material: Acrylic, Plastic, PVC, Plexiglass. Used for: This acrylic bending machine heater can be widely used in decoration engineering, sign making, display cabinet, aquarium wrapping, lighting LED channel letter, bending the supermarket shelves, curtain wall, large light box, acrylic plates and plastic plates.

The acrylic bending machine heater can bend all kinds of plastic sheet. If the thickness of acrylic sheet is beyond 6mm, you can use two heaters heat the top and bottom of the sheet at the same time, or you need to cut a slot on the sheet.

You can also use many acrylic bender heaters to heat more bents at the same time. Reasonable design, small size, compact structure and beautiful appearance; Heat even and temperature adjustable; With circulating cooling water system on both sides of heating pipe; Power supply joint and waterpipe joint are at the same end; The body is made of special aluminum extrusions.

Portable, small occupation, low consumption and reliable operation. Light and practical with low cost, value-priced. Circulating cooling water system can make sure other parts (no heating is required) wont get thermal deformation. Free plugging and unplugging, easy to storage and assembles to worktable very conveniently.

Straight appearance, the effective heating length is 1220mm (48). Low consumption, low cost; Can be assembled to a hot bending machine or used alone; Save space, light and practical; Can bend all kinds of plastic sheet.

1mm - 6mm (0.04" 0.24"). 1.8'' x 1.8'' x 58.3''(45 x 45 x 1480mm).

4.9'' x 4.9'' x 61.3''(125 x 125 x 1556mm). 13.8'' x 7.9'' x 7.1''(350 x 200 x 180mm). The copycat are using the copper water outlet, the bronze looks really good and I think everyone think copper part will be better than others, but you should know the basic thing is the water will corrode copper and make it rusty and get holes, which will cause water leak. Beside this copper part price is not higher than our nylon material part.

The water oulet of our acrylic bender is Nylon material, the reason we use this material is this material do not inflate during water current flow and it do not have water corrosion problems. The copycat heating wire width is not even and its material is not pure Alchrome, if the material is not pure, that will cause part of different temperature. It cause part of Acrylic is soft and other part is still hard. It will cause second time bending or part of Acrylic crack.

The heating wire of our acrylic bender is made by screw pitch which will insure the width and have even temperature to bend acrylic sheet. Copycat's thermostat is common thermostat without heat dissipation base. Thermolator of our acrylic bender is Solid-state thermostat, theirs are common thermostat We also design 4 stands below this thermostat to make sure has better heat dissipation. Temperature tips: The temperature at the central of heating tube is the highest, which can be up to 500°, and greater the distance from the central the lower the temperature.

Actually, the appropriate temperature for bending acrylic is about 240°. The heater can work 24 hours a day on the circumstance that the water temperature is not high. ABM-BT series acrylic bending machine heater has wide applications, such as lighting LED channel letter making, sign making, display cabinet, supermarket shelves, curtain wall, large light box, acrylic plates and plastic plates making, etc.

CS-HD-BC06 Model Sign Letter Tool is mainly used for lighting luminous channel letters or characters. ABM-BT series acrylic bending machine heater is core part of bending machine, it soft the acrylic, you need to bend acrylic by hands. It is space saving, low cost. ABM-SB series acrylic bending machine bends acrylic by electric, with super high precision, but it is expensive relatively. The item "Hotsale 48 1200mm Acrylic Plastic PVC Channel Bending Machine, 1-6mm Thickness" is in sale since Wednesday, April 06, 2016.

This item is in the category "Business & Industrial\Printing & Graphic Arts\Sign Making Supplies\Sign Lettering". The seller is "colorfulworldprinting" and is located in Shandong.

This item can be shipped worldwide.

  • Brand: Generic
  • Model: 48"(1200mm)
  • MPN: ABMBT1200


Hotsale 48 1200mm Acrylic Plastic PVC Channel Bending Machine, 1-6mm Thickness